Bresser TemeoTrend AI Скачать руководство пользователя

Страница: 11 / 36

Gar

antie / W

ranty

(4) SET button –

Switch between time and alarm mode. Press and hold for 2 seconds when in the

appropriate mode to enter setting mode for time and date as well as changing the alarm time.

(5) MAX/MIN button –

Allows switching between the MIN/MAX values. Press and hold for 2

seconds to alternate between °Celsius (°C) and °Fahrenheit (°F).

(6) CHANNEL button –

Press ‘channel’ repeatedly to successively display the information of the

different remote sensors (optional: up to 3 outdoor sensors can be connected). Press and hold

for 2 seconds to initialize transmission of the RC signal from the remote sensor.

Note:

The function for changing the display is only activated when at least two remote sensors are connected.

(7) SNOOZE button –

Press to suspend the alarm.

(8) Wall-mount recessed hole –

This hole makes it possible to mount the main unit on a wall.

(9) Battery compartment

(10) Table stand –

Foldable.

Add if station is to be placed on a flat surface.

Remote sensor

(Fig. 3)

(11) Outdoor temperature

(12) Battery compartment

(13) CH switch –

Select a channel (1-3).

(14) Wall mount hole –

This hole makes it possible to mount the remote sensor on a wall.

(15) TEST button –

Press for a transmission test.

(16) °C/°F button –

This button selects between Celsius (°C) and Fahrenheit (°F).

(17) Table stand –

Foldable. Use this stand to place the device on a flat surface

BEFORE YOU START

IMPORTANT!

1. Insert batteries for remote units before doing so for the main unit.

2. Place the main unit as close as possible to the remote unit.

3. Position the remote unit and main unit within the effective transmission range.
When changing batteries always change batteries in the main unit as well as all remote units and

replace them in the correct order, so the remote connection can be re-established. If batteries are

exchanged in only one of the devices (i.e. the remote sensor) the signal can’t be received or can’t be

received correctly.
Note, that the effective range is vastly affected by building materials and position of the main and

remote units. Due to external influences (various RC devices and other sources of interference), the

maximum distance can be greatly reduced. In such cases we suggest to position the main unit and

the remote sensor at other places. Sometimes all it takes is a relocation of one of these components

of a few inches!
Though the remote unit is weather proof, it should be placed away from direct sunlight, rain or snow.

POWER SUPPLY

Remote sensor

1. Open the battery compartment door.
2. Move the CH switch to the position (1-3) that corresponds with the channel which will be used for

transmission (select channel 1 if only one remote sensor is connected).

3. Install 2 batteries (AAA size 1.5V) strictly according to the polarities shown.
4. Reinsert the battery compartment door.

Main unit

1.  Open the battery compartment door.
2.  Install 2 batteries (AA size 1.5V) strictly according to the polarities shown.
3.  Reinsert the battery compartment door.