Bresser 7802541, Инструкция по эксплуатации

Страница: 18 / 76

18
SETUP THE WEATHER SERVER CONNECTION
Enter the following information into the below web interface "SETUP" page to connect the
console to weather server, If you do not want to use
Wunderground.com or Weathercloud.
net
, please empty the station ID & key to ignore the data upload.
nist.time.gov Server URL:
0.0000 North *Latitude:
0.0000
Enter 0 to 90, no negative numbers
Enter 0 to 180, no negative numbers
East *Longitude:
Time server setup
Location for sunrise / sunset
WiFi Router setup
ADVANCED
Wunderground
Station ID: WDw124
******
******
******
IPACIR23Wc
Weather server setup
Station key:
Router:
Add Router
Search
Security type:
Router Password:
ROUTER_A
Language: English
Weathercloud
Station ID:
Station key:
******
IDCR21w1 Station ID:
URL:
Station key:
Mac address 00:0E:C6:00:07:10
Hemisphere
* Depends on the model
SETUP
Apply
Firmware version: 1.00
0:00 Time Zone:
N
Press "ADVANCED" icon
to Advanced page
Press to search router
Press to allow add
router manually
Enter the Latitude
value
Enter the Longitude
value
SETUP page
Select setup UI display language
Press to complete the setting
Select router (SSID) for connection
Enter new Station ID and Station key
that assigned by Wunderground
Enter new Station ID and Station
key that assigned by weathercloud
Enter new Station ID and
Station key that assigned by the
corresponding weather server
Manually enter the SSID if not on list
Select time server
Select the direction (e.g. EU
countries Longitude is East and
US is West)
Select the sensor located hemisphere
(e.g. US and EU countries are also
"N", Australia is "S")
Add another weather service
(e.g. AWEKAS).
Select router's security type (usually
WPA2)
Router's password (leave blank if
the Security type is "Open")
Select time zone of your location
WPA2
http://ws.awekas.at
NOTE:
- When WI-FI setup is completed, your PC or mobile will resume your default WI-FI
connection.
- During AP mode, you can press and hold the [ S
E
NSOR / WI-FI ] key for 6 seconds to stop
AP mode and the console will restore your previous setting.
TIME ZONE
To automatically set the time display to your time-zone, change the time zone in SETUP
page of previous section from '0:00' (default) to your time zone (e.g.+1:00 for Germany).