Bresser 7802541, Инструкция по эксплуатации

Страница: 22 / 76

22
DAYLIGHT SAVING TIME (DST)
DST function is set to "AUTO" by default (for EU or US version). If the current date on
display is with in the summer daylight saving period, the time will will be automically
adjusted forward by +1 hour, and DST icon will be shown on the LCD dsiplay.
MOON PHASE
The moon phase is determined by
the time, date and time zone. The
following table explains the moon
phase icons of the Northern and
Southern Hemispheres. Please refer
to
POINTING THE WIRELESS 7-IN-1
SENSOR TO SOUTH section about how
to setup for the Southern Hemispheres.
Northern
Hemisphere
Moon Phase
Southern
Hemisphere
New Moon
Waxing
Crescent
First quarter
Waxing
Gibbous
Full Moon
Waning
Gibbous
Third quarter
Waning
Crescent
SUNRISE & SUNSET TIME
The console indicates your location’s sunrise & sunset
time by the time zone, latitude and longitude you entered.
Please enter the correct information in the regarding
settings. If the latitude and longitude values do not match
the time zone, the sunrise & sunset time cannot be shown.
SETTING ALARM TIME
1. In normal time mode, press and hold
[ ALARM ]
key for 2 seconds until the alarm hour
digit flashes to enter alarm time setting mode.
2.
Press [ ] or [ ]
key to change the value. Press and hold the key for quick-adjust.
3.
Press [ ALARM ]
key again to step the setting value to Minute with the Minute digit
flashing.
4.
Press [ ] or [ ]
key to adjust the value of the flashing digit.
5.
Press [ ALARM ]
key to save and exit the setting.
NOTE:
- In alarm mode, the “ ” icon will display on the LCD.
- The alarm function will turn on automatically once you set the alarm time.
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1. In normal mode, press
[ ALARM ]
key to show the alarm time for 5 seconds.
2. When the alarm time displays, press
[ ALARM ]
key again to activate the alarm function.
Or
press
[ ALARM ]
key twice to activate the alarm with ice pre-alarm function.
Alarm off
Alarm on
Alarm with ice-alert