Breckwell Big E SP1000PB, Руководство пользователя

Страница: 16 / 27

FAILURE TO CLEAN AND MAINTAIN THIS UNIT AS INDICATED
CAN RESULT IN POOR PERFORMANCE AND SAFETY
HAZARDS. NEVER CLEAN WHEN HOT.
NOTE:
Inspect burn pot periodically to see that holes have not
become plugged, if so, clean thoroughly.
ASH REMOVAL
Ashes should be placed in a metal container with a tight-fitting lid.
The closed container or ashes should be placed on a
noncombustible surface or on the ground, well away from all
combustible materials pending final disposal. If ashes are disposed
of by soil burial or otherwise locally dispersed, they should be
retained in the closed container until all cinders have thoroughly
cooled.
ASH DISPOSAL
To remove ashes:
a.
Make sure fire is out and firebox is cool.
b.
Clean heat exchanger tubes (see “ CLEANING ” and Figure 15).
c.
Remove the burnpots inner section by grasping it and pulling
straight up (see Figure 16).
d.
Empty ashes from the inner section and scrape with cleaning
tool; make sure holes are not plugged.
e.
Vacuum to remove ashes from the burn chamber interior and
the burnpot shell.
WARNING: Make sure ashes are cool to the touch
before using a vacuum.
See “ VACUUM USE ”.
f.
Dispose of ashes properly.
(See “
ASH REMOVAL ” above)
g.
Replace inner section into burnpot; make sure it is level and
pushed all the way back down and that the igniter hole is to the
rear when it is reinstalled (see Figure 17).
h.
Make sure the burnpot is level and pushed all the way in, if the
collar on the burnpot attached to the fresh air tube is not
pushed back to meet the firebox wall, the Hot Rod will not work
properly.
VACUUM USE
We suggest using a vacuum designed for ashes.
(We recommend LoveLess Ash Vac, 1-800-568-3949 Ext. #27)
Some regular vacuums and shop vacs leak ash into the room. Your
vacuum or shop vac may have a special filter or bag available to
eliminate this leakage.
MAINTENANCE 16
FIGURE 15
FIGURE 16
FIGURE 17
Igniter Hole