Breckwell Big E SP1000PB, Руководство пользователя

Страница: 10 / 27

SPECIAL MOBIL HOME REQUIREMENTS
WARNING: DO NOT INSTALL IN A SLEEPING ROOM.
For installation in a mobile home, an outside source of combustion air must be used
(See “
COMBUSTION AIR SUPPLY” ).
The Breckwell Big E must be grounded to the steel chassis of the home with 8 Ga. copper wire using a serrated or star washer to penetrate
paint or protective coating to ensure grounding.
The Breckwell Big E must be securely fastened to the floor of the mobile home through the two holes in the rear of the stove using 2, ¼” lag
bolts that are long enough to go through both a hearth pad, if used, and the floor of the home. (See figure 11)
Refer to “
VENTING ” for proper exhaust configurations.
CAUTION: THE STRUCTURAL INTEGRITY OF THE MOBILE HOME FLOOR, WALL AND
CEILING/ROOF MUST BE MAINTAINED.
OPERATION 10
FIGURE 11
Bolt Hole
Bolt Hole