background image

LIMITED WARRANTY 

 
 

Breckwell Hearth Products warrants to the original consumer purchaser that The Big E 
Breckwell stove in its original installation is free from defects in material and 
workmanship from the original date of purchase as follows: 
 
Non-electrical components, excluding burnpots and burnpot inserts, are covered for five 
years.  Electrical components, which include the digital control board, auger motor, 
combustion and convection blowers, and igniter, are covered for one year.  Glass is 
warranted for one year  only for thermal breakage.  There is no warranty on gaskets, 
paint, burnpots, or burnpot inserts. 
 
This warranty covers defect in materials and workmanship in covered components, 
provided this product has been properly installed and operated strictly in accordance 
with the instructions in this owner’s manual and any applicable local codes.  This 
warranty does not cover damage or breakage caused by improper handling, misuse, 
abuse, overfiring, disassembly, unauthorized modification or other circumstances 
beyond Breckwell’s control. 
 
If warranty service is needed during the warranty period, notify the nearest Authorized 
Breckwell Dealer.  Provide your name, address, phone number, serial number and 
model number of the stove, date of purchase, name and address of installer and as 
much information as possible about the nature of the problem. 
 
If the dealer must examine the Breckwell stove at the consumer’s residence, a 
reasonable service call charge may be incurred and is the responsibility of the 
consumer.  If the unit must be transported, those charges will be the consumer’s 
responsibility.  Breckwell’s sole responsibility is to repair or replace the defective part as 
stated herein.  Breckwell will not be liable for consequential or indirect damages to 
property or persons  resulting from use of this product.  No other express warranty is 
given and no affirmation of Breckwell or its agents by work or action shall constitute a 
warranty. 
 
All disputes relating to this warranty shall be tried before the courts of Oregon.  Venue 
in any litigation arising hereunder shall be in the Circuit Court of the state of Oregon for 
the County of Lane. 
 
Warranty limitations may not apply in your area.  This warranty gives you specific legal 
rights.  You may also have other rights which vary from state to state. 

 

Purchased from 
 
Date Purchased 
 
Model 
 
Serial Number 
 
Installed by 
 

 

4/04

 

PLEASE KEEP THIS FOR YOUR RECORDS 

Содержание Big E SP1000PB




























Отзывы: