Brecknell SBI-240 Скачать руководство пользователя

Страница: 19 / 78

I-240

Service Manual

0_____

Under zero range

3.5.4 Setting a Tare Weight

Zero the scale by pressing the

ZERO/ON/OFF

key.

Place an empty container on the platform. Press the

TARE/PRESET

key.

The display will return to zero, eliminating the weight of the container.
The "NET" annunciator will be lit on the display.

Place the material or object to be weighed in the container.

The net weight will be displayed.

To exit the tare mode, remove all weight from the scale.

The display will show a negative weight.

Press the

TARE/PRESET

key to return the display to zero.

3.5.5 Setting a Pre-determined Tare Weight

Zero the scale by pressing the

ZERO/ON/OFF

key.

Press and hold the

TARE/PRESET

key until

Pr.Tare

is displayed.

The tare weight will be displayed. The first digit and NET will flash on the
display.

Enter the tare weight using the

keys. After inputting the tare

weight, press the

TARE/PRESET

key to confirm.

The "NET" annunciator will be lit in the display.

Place the material or object to be weighed onto the scale platform.

The net weight will be displayed.

To exit tare mode, remove all weight from the scale. The display will show a
negative weight. Press the

TARE/PRESET

key to return the display to zero.

3.5.6 Change Weight Unit

Press the

[UNIT/DATA]

key to select kg, lb, oz, lb:oz, g. Note: under some conditions

oz, lb:oz, g are not available. Please refer the following tables.

NOTE: Tare weight must be greater than zero and no more than the maximum scale
capacity.

NOTE:

Note:

This indicator can only save one tare weight. The new tare weight will

automatically replace the old one. Pre-determined tare will be lost after the scale is
turned off.

Содержание SBI-240















































































Результаты поиска

Содержание SBI-240

Отзывы:

Похожие инструкции для SBI-240

Бренды по названию

Популярные бренды

Brecknell SBI-240, Руководство по обслуживанию

Результаты поиска

Содержание SBI-240

Отзывы:

Похожие инструкции для SBI-240

Бренды по названию

Популярные бренды