BRAYER BR3433, Инструкция по эксплуатации

Страница: 10 / 44

10 EN
•
After you finish cutting hair, switch the hair clipper off
by moving the switch (5) to the position «0».
•
Remove the installed attachment comb (fig. 4), clean
it from the hair, clean the blades (1, 2), use a brush
for cleaning (13).
• Lubricate blades.
CLEANING AND CARE
•
Turn off the hair clipper after using it by setting the
power switch to the «0» position and unplug the
power cord from the mains.
• Remove the installed attachment comb (8, 9, 10 or
11) (pic. 4) and clean it from hair with the brush (13).
• Clean the blade block (1, 2). Do not wash the blade
block (1, 2) and the inner cavity of the hair clipper
body under a water jet.
• Clean the hair clipper body (4) with a soft, slightly
damp cloth, and then wipe it dry.
• Do not use abrasives or solvents to clean the hair
clipper body (4), the power adapter (9) and the
attachment combs (8, 9, 10, 11).
• Do not immerse the hair clipper, the power cord and
the power plug into water or any other liquids.
• Lubricate the blade block (1, 2) after every use with
the lubricating oil (12).
STORAGE
• Before taking the hair clipper set away for storage,
clean the hair clipper body, the blade block (6) and
the attachment combs (8, 9, 10, 11).
• Lubricate the blade block (1, 2) with lubricating oil
(12).
• Keep the hair clipper set in a dry cool place out of
reach of children and disabled persons.
DELIVERY SET
1. Hair clipper — 1 pc.
2. Attachment combs — 4 pcs.
3. Lubricating oil — 1 pc.
4. Cleaning brush — 1 pc.
5. Manual — 1 pc.
TECHNICAL SPECIFICATIONS
• Power supply: 220-240 V ~ 50/60Hz
•
Output voltage: 15 W
RECYCLING
To prevent possible damage to the
environment or harm to the health of people
by uncontrolled waste disposal, after
expiration of the service life of the unit or
the batteries (if included), do not discard
ATTENTION!
Do not use the unit near water in the
bathrooms, showers, swimming pools etc.