BRAYER BR3433, Инструкция по эксплуатации

Страница: 5 / 44

5 EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation manual carefully before using
the hair clipper set; after reading, keep it for future
reference.
• Use the hair clipper as intended, as it is stated in this
manual.
• Mishandling the unit can lead to its breakage and
cause harm to the user or damage to the user’s
property, which is not covered by warranty.
• This hair clipper set is intended for household use
only and not for professional use.
• Use the hair clipper only for cutting dry natural
human hair.
•
Do not use the hair clipper for cutting artificial wigs or
animal hair.
• Make sure that the operating voltage of the unit
indicated on the label corresponds to your home
mains voltage.
• Provide that the power cord does not touch hot
objects and surfaces and sharp edges of furniture.
Do not immerse it into water or use as a carrying
handle.
• Do not use the hair clipper next to a kitchen sink, in
bathrooms, near swimming pools or other containers
filled with water.
• If the unit is dropped into water, unplug it
immediately, and only then you can take the hair
clipper out of water. Apply to the service center for
testing or repairing the unit.
• To unplug the unit do not pull the power cord, take
the power cord plug directly and disconnect it from
the mains.
• Do not use the unit outdoors.
• Do not use the unit in places with high temperature
and relative humidity more than 80%.
• It is recommended not to use the unit during lightning
storms.
• Protect the unit from impacts, falling, vibrations and
other mechanical stress.
• Do not use the unit near heating appliances, heat
sources or open flame.
• Do not use the unit in places where aerosols are
used or sprayed, and in proximity to inflammable
liquids.
• Use only the attachment combs supplied with the
unit.
• Before the operation make sure that the blade block
and the attachment comb are installed properly.
• Do not use the hair clipper if the blades or attachment
combs are damaged.
•
Switch the hair clipper off before installing or
removing the attachment combs or the blade block.
• Keep the blades clean and lubricated.
•
Clean the cut hair off the blade block and the
attachment comb with the brush after each use.
•
Always switch the hair clipper off when you do not
use it.