Braun 0871 3050, Руководство по обслуживанию

Страница: 71 / 136

Disassembly / Assembly
3
Infusomat® Space 6.0 3 - 25 EN
3.10 Inner frame
Designation Order No.
Lock bolt drive ISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1429
Linear poti ISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1056
Pressure adjustment unit ISPS . . . . . . . . . . . . . . . . . . . 3452 1445
(spring holder, pressure springs, adjusting screw
adjusting nut, bracket, bracket locking)
Pump frame ISP, without motor . . . . . . . . . . . . . . . . . 3452 1402
Pump drive motor ISP . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1410
Lock bolt ISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1496
Inner frame ISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1437
Bracket locking and screws
(see „Service Parts and Screw Kit“ ➨ pg. 3 - 7)
Note
Please pay attention to the corresponding notes during assembly
and installation
(see „Inner Frame“
➨
pg. 3 - 42) .
Disassembly
1. Carefully press two bracket lockings ( Fig.: 3 - 24 / Item 10 ) at
the front and rear out of the inner frame ( Fig.: 3 - 24 /
Item 3 ).
*
2. Push the bracket ( Fig.: 3 - 24 / Item 6 ) forward against spring
tension, unhook from the inner frame and remove it together
with the pressure adjustment unit (
Fig.: 3 - 24 / Item 7 ).
3. Press the pump frame guide (6 mm straight pin) ( Fig.: 3 - 24
/ Item 8 ) in longitudinal direction out of the linear bearings
of the pump frame and the inner frame holders and remove
the pump frame from the inner frame.
*
Do not reuse the bracket lockings