23
n.8001
Power-on start (no external input signal required)
Initial value
：
n. 01 01
（
H L
）
Control mode
：
all
Unit
：
~
Setting range
：
~
Modify effective time
：
“●”Can be modified at any time, take effect by re-powered on
Parameter function
：
H
：
00
：
Set the signal to always be invalid 01
：
Input positive signal from SI1 terminal
02
：
Input positive signal from SI2 terminal 03
：
Input positive signal from SI3 terminal
04
：
Input positive signal from SI4 terminal 05
：
Input positive signal from SI5 terminal
06
：
Input positive signal from SI6 terminal 07
：
Input positive signal from SI7 terminal
08
：
Input positive signal from SI8 terminal
80
：
Set the signal to always be active 81
：
Input reverse signal from SI1 terminal
82
：
Input reverse signal from SI2 83
：
Input reverse signal from SI3
84
：
Input reverse signal from SI4 85
：
Input reverse signal from SI5
86
：
Input reverse signal from SI6 87
：
Input reverse signal from SI7
L
：
00
：
External input is completely based on factory settings
，
the setting of
P5-10.H~P5-19.H
is
invalid
01
：
External input signal can be set freely
，
the setting of
P5-10.H~P5-19.H
is valid.
6.2.2 Motor rotation direction
◎
P0-05
Direction
selection
Note: After switching the direction, the signal
received by servo is reversed.
0X0005
Initial value
：
0
Control mode
：
1,2,3,4,5,6,7
Setting range
：
0,1
Modify effective time
：
“●”Can be modified at any time, take effect by re-powered on
Parameter function
：
0
：
Forward direction (from the load side is "counterclockwise rotation")
1
：
Forward direction (from the load side is "clockwise rotation" )
P0-05
Forward
Reverse
0
CCW
CW
