Brandt BOP2432X, Инструкция пользователя

Страница: 70 / 131

18
Caring for and cleaning your appliance Caring for and cleaning your appliance
• Automatic self-cleaning
12:05
Pyro
12:45
2
H
00
The programmer must display the time of day and must not be flashing. Select the self-
cleaning cycle with the function selector :
12:05
Pyro
2
H
00
Position the knob on this function .
Select your pyrolysis cycle with the + and - knob depending on the degree of soiling of your oven.
Select between:
P01: PYRO 2H
P02: PyroExpress* or PYRO ECO 1H30 displays.
Confirm with the + and - knob, the pyrolysis cycle begins. At the end of the cleaning cycle, 0:00 will
appear on the display and the door will be unlocked. Turn the function selector back to 0.
* PyroExpress in 59 minutes.
This specific function uses the heat built up during a previous cooking cycle to quickly and
automatically clean the inside of the oven: it cleans a mildly dirty oven interior in less than
an hour.
The electronic oven temperature monitor determines whether the residual heat remaining
in the oven interior is sufficient to provide a good cleaning result. If this is not the case, a
90-minute ECO pyrolysis cycle will automatically begin.
Pyro"Express 59 minutes"
When this indication displays on the screen, you can start a "PyroEx-
press in 59 minutes” cycle.
CLEANING THE INNER AND OUTER SURFACES
WARNING
Remove the accessories from the oven before beginning pyrolysis cleaning. Before starting
pyrolysis cleaning, remove any large overspills, if any. Remove the excess grease on the door
using a damp sponge.
As a safety measure, cleaning by pyrolysis only occurs after the door locks automatically, it is then impos-
sible to unlock the door.
• Cleaning the oven cavity with pyrolysis