Brady LabelMark 3, Руководство пользователя

Страница: 49 / 98

Advanced LabelMark Techniques
Advanced LabelMark Techniques 43
•
When you create a new file with a continuous part, the value you enter in the Repeat/Length (or
Repeat/Width for rotated parts) box determines:
The length of the label if printing a banner label.
The center-to-center spacing for terminal block labels.
•
The maximum length for continuous TLS PC Link parts is 6” (152.4 mm).
•
Repeat value limits are 0.1” (2.54 mm) minimum to 32” (812.8 mm) maximum.
•
Set repeat value limits in your user defaults (see Changing User Defaults ) or when you create your
file (see Quick Start Guide – Creating a Basic Text Label ).
Using the Flip-Flop Feature
The flip-flop feature allows you to transpose text around a flip point. For example 123|456 would flip-flop
to 456|123 . You designate the flip point by placing the flip character in a line of text. The feature is useful
for identifying parts that are connected end-to-end. In LabelMark Plus , flip-flop works for text objects and
text blocks.
To perform a flip-flop:
1. Insert the flip character at the point around which you want the flip-flop to occur.
Note: The default flip character is the pipe symbol “ | ” (found on the “ \ ” key on your keyboard).
See Changing User Defaults to designate a different character.
2. Select the label(s) you want to flip.
3. Select Tools Flip-Flop , and one of these options:
Left to Right – Transposes text to the left of the flip character to the right and vice versa.
Before After