BradyJet J4000 User Manual
18
Settings
Settings
The settings button, located in the lower left corner of the Brady PrintHub allows you to do the
following:
•
Change currency
•
Change language
•
Check for updates
•
Set printing preferences
•
Generate a support report
•
Generate printer status
Adjusting Print Alignment
If your previous experience with printing is limited to standard size paper you may not be familiar with
an essential part of label printing - Print Offsets or Alignment. Standard printers feed a sheet and start
printing based on the start of the sheet. They also prohibit printing to the edge of the sheet. This is to
avoid any need for adjusting offsets. The BradyJet J4000 printer, however, senses the beginning of
the label with an optical sensor and is capable of printing to top, bottom, left and right edge. Because
of this it is necessary to align the printer to work with specific types of label supply.
The printer comes factory calibrated to print exactly to the edge of Brady label supply. The printer
decides where to start printing by detecting the start of a die-cut label or detecting a through-hole that
corresponds to the start of the label. However, due to variations in the left margins and other variables
it may be necessary to fine tune these settings at the beginning of each roll.
IMPORTANT!
Before adjusting alignment settings, first print one label at the quality level you
intend for the entire job. This will ensure the label supply is moving at the same
speed and the supply sensor will sense the gap in the same way.
Содержание BradyJet J4000
Страница 1: ...User Manual...
