Classic Circular 36"/54" Washfountain with Foot Control
Installation Instructions
WF2605, WF2608 Terrazzo — WF2705, WF2708 Stainless Steel
Bradley Corporation • 215-603 Rev. M; EN 06-915B
13
4/6/2007
Installation Instructions continued . . .
Step 5b: Installing Supplies with Optional Soap Dispenser for B/H drain units
NOTE: Flush supply lines before making connections.
1. Install the hemmed end (not sharp end) of the support tube with gasket onto the bowl.
2. Using pipe sealant, connect the supply pipe to the sprayhead and place on top of the support tube
as shown in Figure 9 on page 14.
3. Insert the 1-1/2" vent pipe (supplied by installer, see page 4 for length) through the soap dispenser
with the spacer (if provided), sprayhead and support tube.
4. Connect to the vented trap (provided).
5a
.
For Unit with Soap Option:
1. Slide the tie bar over the 1-1/2" vent pipe 1/2" below the top of the soap dispenser and secure
with the set screws.
2. Slide the dispenser cover over the 1-1/2" vent pipe and secure with the two screws (included)
to the tie bar.
5b
.
For Unit without Soap Option:
1. Slide the tie bar over the 1-1/2" vent pipe, 1/2" below the top of the sprayhead and secure with
the set screws.
2. Secure the dispenser cover over the 1-1/2" vent pipe and secure with the two screws included
with the tie bar.
6
.
Connect the Vent Pipe
a. Connect the vent pipe to the vent through the ceiling with the pipe union.
b. Continue installation with Step 6 on Page 15.
