background image

Technical Helpline: 0845 402 9924

Half Height Glass Shower Door
Fitting Instructions

from

Bi-folding door & A return panel

Left hand panel, right hand door illustrated

Bi-folding door & A BI-PARTING DOOR

Left hand panel, right hand door illustrated

TWIN Bi-folding doorS

Not handed illustrated

BI-PARTING doorS

Not handed illustrated 

Corner Shower Door Options

FIXED panel

Left hand panel illustrated

TWIN Bi-folding doorS

Not handed illustrated

BI-PARTING doorS

Not handed illustrated 

Inline Shower Door Options

PLEASE READ ALL INSTRUCTIONS CAREFULLY & LEAVE WITH THE END USER.
INSTRUCTIONS ARE PREPARED TO HELP WITH THE ASSEMBLY & INSTALLATION OF HALF HEIGHT 
SHOWER DOORS TO SUIT A CORNER OR INLINE / ALCOVE SETTING. 
CAREFULLY UNPACK THE PRODUCT. ENSURE YOU DO NOT ACCIDENTALLY DISPOSE OF ANY PARTS.

CHECK THAT THE SHOWER AREA / SHOWER TRAY WHERE THE DOORS ARE TO BE 
INSTALLED IS LEVEL.

ALL SEALS ARE PRE-APPLIED AND SHOULD NOT BE REMOVED DURING INSTALLATION
PROTECT SHOWER TRAY SURFACES AND COVER ANY WASTES TO PREVENT LOSS OF SMALL 
ITEMS & TO PREVENT DEBRIS ENTERING THE PIPEWORK.
USE THE OUTER CARTON TO PROTECT THE FLOOR AND / OR WALL DURING ASSEMBLY IF 
NECESSARY.
ALLOW SUITABLE CURING TIME FOR SILICONE SEALANT. THIS COULD BE 24 HOURS DEPENDING 
UPON THE VARIETY USED. 
IN THE CASE OF ANY DIFFICULTIES BEING ENCOUNTERED, PLEASE DO NOT HESITATE TO CONTACT 
OUR TECHNICAL DEPARTMENT ON 

0845 402 9924.

DUE TO THE NATURE OF ALL GLASS SHOWER DOORS, WE CANNOT GUARANTEE THEY 
ARE 100% WATERTIGHT.
WE DO NOT APPROVE THE USE OF POWER SHOWERS WITH EASY ACCESS SHOWER 
DOORS AND SHOWER TRAYS.

Read before installation:

Bi-folding door & A FIXED PANEL

Left hand panel, right hand door illustrated

Revision 1

Contour Showers, Siddorn Street, Winsford, Cheshire CW7 2BA
Telephone: 01606 592586   Fax: 01606 861260   
Email: [email protected]   
Website: www.contour-showers.co.uk

LIFETIME

GUARANTEE

EASY CLEAN GLASS

Opulence glass shower enclosures are coated with an Easy 
Clean coating. The coating is an effective protection for easy 
to clean glass. 

To optimize the durability of the Easy Clean protection, we 
recommend the following:
• Regularly rinse off the water & soap deposits by drying 
      the surface with a squeegee or cloth if necessary.
• Clean the glass panels weekly (depending on the use & 
    the hardness of the water).
• 

Clean glass with warm soapy water or water 

   

 

containg a small amount of washing up liquid

.

 

   

 

Rinse thoroughly & wipe with a soft, non-abrasive cloth.

DO NOT USE

 abrasive products, strong or concentrated 

acids, alkalis, chlorine or other abrasive cleaning products 
such as household bleach, disinfectant, bathroom limescale 
remover / mousse as they may discolour or damage the 
coating and void the warranty.

EASY

CLEAN

glass

Содержание Opulence

Страница 1: ... SUITABLE CURING TIME FOR SILICONE SEALANT THIS COULD BE 24 HOURS DEPENDING UPON THE VARIETY USED IN THE CASE OF ANY DIFFICULTIES BEING ENCOUNTERED PLEASE DO NOT HESITATE TO CONTACT OUR TECHNICAL DEPARTMENT ON 0845 402 9924 Due to the nature of all glass shower doors we cannot guarantee they are 100 watertight We do not approve the use of power showers with easy access shower doors and shower tray...

Страница 2: ... for applying to the bottom edge of the glass panel see inset above We recommend using this on a tiled floor setting DO NOT DRILL FIXING HOLES INTO COMPENSATOR INNER YET DO NOT REMOVE PANEL STICKERS UNTIL DOORS ARE FULLY ASSEMBLED The hinge attached to PANEL A will have a spigot ready to accept PANEL B Ensure the spigot part of the hinge is on the outer side of the door with the receiving pin poin...

Страница 3: ...now assembled one section of your door Repeat STEPS 3 to 9 to complete the return panel or inline door panel assembly DO NOT TIGHTEN ANY SCREWS YET A B C With the doors still in the closed position use a 5mm allen key to fully tighten the 4 x allen screws on each hinge see above left Attach the 4 x chrome cover caps to cover the screw heads Using a 3mm allen key tighten the hinges top grubscrew Th...

Страница 4: ...e for silicone this may be 24 hours depending on the variety used FOLLOW THE MANUFACTURERS GUIDELINES WHEN USING SILICONE SEALANT 13 DRILL COMPENSATOR 15 FIX STABILISER BAR Measure from the wall to the front inside edge of PANEL A compensator see above left Using your measurement measure from the front shoulder of the top cap back to the ribbed area of the top cap and mark see above right Cut of t...

Отзывы: