3 of 10
1/29/2018
Bradley
• 215-1834-32 Rev. A: ECN 17-00-020
TouchTime
®
Activation Modules - Non-Sectional Circular Washfountains
WF2505, WF2508, WF2605, WF2608, WF2705, WF2708, WF2805 & WF2808
P.O. Box 309
•
Menomonee Falls, WI 53052-0309
•
1 800 BRADLEY
•
262 251 6000
•
bradleycorp.com
Unit with "O" Drain and
TouchTime Module Shown, Also
Available with "A" Drain
Top Cover
Soap
Dispenser
8-5/8" Tie Rod
Spacer
Coupling
Nut
Module
Cover
4-1/4" Tie Rod
TouchTime Module
Assembly
Pushbutton (S83-340-DC)
Piezo Switch (S83-383-DC)
Coupling
Nut
Tie Bar
Sprayhead
(S05-054) See 215-1384-21
for supply connections.
Support Tube
36" Bowl (S57-006)
54" Bowl (S57-005)
Standard Tie Rod
21-5/8"
Juvenile Tie Rod
18-1/8"
Some optional equipment shown.
1a
Assemble TouchTime
®
– A and O Units (O Shown) (cont...)
D
Place the TouchTime module assembly
on top of sprayhead. Rotate until module
locks in with tie bar. Run TouchTime button
cables through the support tube down into
the pedestal and connect to the TouchTime
modules, taking care that each sprayhead
section's 1/2" supply tube and TouchTime
module cable are connected to the same
valve (see details in Steps 2 and 3).
Skip to step F for units without soap.
E
For units with soap option, install the spacer,
soap dispenser and cover using coupling
nut, soap tie rod (8-5/8" long) and second
coupling nut as shown.
F
Secure module cover and dispenser cover
with acorn nut and set screw.
G
Connect supply stops onto stub-outs.
Connect flexible hoses to supply stops.
H
FOR O UNIT:
Install 1/2" nominal copper
tubing supply lines (pass them through holes
in cover down through support column) and
connect to stops using suitable fittings.
