Braaap ST-160, Руководство пользователя

Страница: 57 / 84

Cleaning a paper filter element
1. Remove the left side guard board.
2. Remove the tensioning band screw from the air
filter connector. Pull out the intake pipe and
separate it from the filter.
3. Take out the filter element.
4. While rotating the filter element, pat it to remove
any dust and blow off remaining dust by using
compressed air.
5. Reinstall the filter, following in reverse order the
instructions given above for the removal of the
filter. Ensure that the filter element is firmly fixed
in its correct position and reliably sealed.
Caution
To preserve the life of the engine, never start the
engine without the filter element installed.
Caution
The air filter element must be cleaned or replaced
more frequently if the motorcycle is used in dusty
conditions.
Carburettor
A stable carburettor is fundamental to a satisfactory
engine performance. There are two parts of the
carburettor that can be adjusted: the accelerator wire
clearance and the idle speed. Carry out adjustments
after the first 1,000 km and every 3,000 km driven
thereafter.
Caution
The carburettor in your motorcycle has been
adjusted at the factory for best performance. Any
unnecessary adjustment should be avoided.
57
braaap Motorcycles /
ST-160 / ST-250 Owner Manual
8. Maintenance