Braaap ST-160, Руководство пользователя

Страница: 37 / 84

Note
After starting the engine, immediately release the
start button to avoid damage to the engine. If the
engine does not start after 5 seconds, take your
finger off the start button and wait for 10 seconds
before attempting to start the engine again.
If the engine does not start after two or three
attempts, take your finger off the start button,
rotate the accelerator grip by an 1/8 to 1/4 turn and
try again.
Starting with the Kick Start Lever
When the battery is discharged, the engine can be
started by using the kick start lever.
Turn the ignition switch to the ON position, pull out
the kick starter and quickly push down until the bike
starts.
Starting a cold engine
Put the carburettor enrichment handle (in a plunger
carburettor) or lever (in a vacuum carburettor) to the
highest position (plunger) or pull it out fully (vacuum),
keep the accelerator closed, and press the electric
start button.
After the engine is started, press the handle half way
down (plunger) or push the lever half way in (vacuum)
and wait for the engine to adequately warm up before
returning the lever to its original position. The colder it
is, the longer warm-up time the engine takes.
Starting a warm engine
Rotate the accelerator grip by 1/8 to 1/4 turn and
then press the start button to start the engine. When
the engine is warm, it is not necessary to use the
carburettor enrichment system.
37
braaap Motorcycles /
ST-160 / ST-250 Owner Manual
7. DRIVING ESSENTIALS