Adjusting the Drive chain
1. Adjusting bolt
2. Locating Nut
3. Mark
4. Rear wheel shaft nut.
To Adjust
1. Park the motorcycle
2. Loosen the rear wheel shaft nut
3. Loosen the locking nut
4. Rotate the adjusting bolt left and right to adjust
the chain.
Note
When a new chain is installed, it is necessary to
check both chain wheels. Replace if necessary.
Ensure that the tension of the drive chain is
adjusted every 1,000 km to ensure that there is
always between 20 - 30 mm of slack in the chain.
Caution
The open end of the drive chain connection clip
should point away from the direction of rotation.
1
3
2
4
62
braaap Motorcycles /
ST-160 / ST-250 Owner Manual
8. Maintenance
Содержание ST-160
