BOXER 600HD Скачать руководство пользователя страница 51

Страница: 51 / 89

Pre Start Inspection and Operation

3.28

Operating Instructions for a Hydraulic Attachment

Move the engine throttle to the full speed setting. Raise the attachment off the ground and

position it for use.

2. Move the HI/LOW selector switch to either the high speed or low speed setting

depending on the attachment to be used. This setting will control both the functional speed

of the attachment as well as machine travel speed.

Figure 3-38 Auxiliary Attachment Controls

Make sure that you are standing on the operator’s platform and holding the

Attachment Control Joystick in the nuetral position.

3. With your right hand, move the joystick per the decal on the machine (Item 1,

Figure

3–38

) towards the hand grip to activate the FORWARD motion of the attachment.

When using an attachment that will require the machine to move, such as with a

trencher or tiller, it is recommended to set the HI/LOW selector button to the LOW

speed position.

CAUTION

Содержание 600HD


























































































Результаты поиска

Содержание 600HD

Отзывы:

Бренды по названию

Популярные бренды

BOXER 600HD, Руководство оператора

Результаты поиска

Содержание 600HD

Отзывы:

Бренды по названию

Популярные бренды