Pre Start Inspection and Operation
3.25
5. When the machines mounting plates top edge is seated in the attachment mounting
plate, tilt the machines mounting plate backwards slightly to allow the lower edge of the
machines mounting plate to slide into position. See
Figure 3–33
.
Figure 3-33 Hydraulically Powered Attachment Installed
6.
Shut the engine off.
DO NOT go underneath the attachment when it is raised.
7. Rotate the attachment lock pins (Item 1,
Figure 3–33
, Item 1,
Figure 3–34
) into the locked
position securing the attachment to the machine.
Figure 3-34 Attachment Locks in Locked Position
8.
Start the engine and raise the attachment off the ground. Visually inspect the bottom edge
of the attachments mounting plate to make sure that both of the attachment lock pins are
securely holding the attachment in position.
9.
Shut off the engine.
10. Move any of the main hydraulic controls forward and backward to release any stored
hydraulic pressure.
11. Attach the hydraulic hoses to the quick connects. See
Figure 3–35
.
CAUTION
1
1
Pins Locked
