BOXER 600HD Скачать руководство пользователя

Страница: 47 / 89

Pre Start Inspection and Operation

3.24

Installation of Hydraulically Powered Attachments

There are many hydraulically powered attachments available that are very easy to install. To

install any of these attachments:
1. Position the attachment on a level surface.

NOTE

: Clean the lower edge of the female attachment mounting plate to remove any

debris that might interfere with the attachment installation.

2. Start the machine engine, lower the loader arm and tilt the mounting plate forwards.

NOTE;

Make sure that both of the attachment lock pins (Item 1,

Figure 3–31

) are in the

“unlocked” position.

Figure 3-31 Attachment Locks in Unlocked Position

3. Slowly drive towards the attachment and align the top edge of the male mounting plate and

the upper lip of the female attachment mounting plate.

Make sure to position the attachments hydraulic hoses so that they are not damaged during

the installation process.

4. Tuck the upper edge of the male mounting plate into the upper lip of the female attachment

mounting plate.

Figure 3-32 Hydraulically Powered Attachment Installation

Pins Unlocked

NOTICE

Содержание 600HD


























































































Результаты поиска

Содержание 600HD

Отзывы:

Похожие инструкции для 600HD

Бренды по названию

Популярные бренды

BOXER 600HD, Руководство оператора

Результаты поиска

Содержание 600HD

Отзывы:

Похожие инструкции для 600HD

Бренды по названию

Популярные бренды