BOXER 600HD Скачать руководство пользователя

Страница: 50 / 89

Pre Start Inspection and Operation

3.27

quick connect coupling (Item 1,

Figure 3–36

) on the machine and push until the

connector locks into position.

e. Repeat the above process to connect the attachments’ female quick connect (Item 4,

Figure 3–36

) on the other hose to the male bulkhead connector (Item 5,

Figure 3–36

) on

the machine.

f. Check the security of both connections by gently tugging on the attachment hoses to

make sure that the quick connects are seated properly.

12. Make sure that the hydraulic hoses are routed so that they will not be in the way or

damaged during machine operation.

Figure 3–37

shows how the hoses might be routed to

keep them out of the way during operation and prevent them from being damaged.

Figure 3-37 Attachment Hydraulic Hose Routing

13. The attachment is now ready to use.

Before starting the engine, make sure that the Auxiliary Hydraulic control lever is in the

NEUTRAL position. If this control is left in either the forward or reverse position and

the engine is started, the attachment will begin to function.

CAUTION

Содержание 600HD


























































































Результаты поиска

Содержание 600HD

Отзывы:

Похожие инструкции для 600HD

Бренды по названию

Популярные бренды

BOXER 600HD, Руководство оператора

Результаты поиска

Содержание 600HD

Отзывы:

Похожие инструкции для 600HD

Бренды по названию

Популярные бренды