BOXER 600HD Скачать руководство пользователя

Страница: 3 / 89

Boxer Product Warranty

Morbark, LLC. (Morbark) warrants to the original purchaser that this product will be free

from defects in materials and workmanship under normal use and operating conditions

subject to the conditions and exclusions stated below. No representative, agent or dealer of

Morbark or any other person is authorized to modify, expand or extend this warranty in any

manner or make any representation on Morbark’s behalf in connection with the sale of any

product covered by this warranty. The warranty period starts with the start-up in-service date.

See the Warranty Period Chart for information on the warranty period.

EXCLUSIONS

This warranty shall not apply to:

Product which has been subject to misuse, neglect, modification,

alteration, accident or lack of normal maintenance or service

2. Fire damage
3. Labor, unless provided by an authorized Morbark dealer

REMANUFACTURED PARTS

Morbark reserves the right to use remanufactured parts, when available, for warranty

replacement parts. The remanufactured component has the same warranty as if it was new.

PURCHASER’S EXCLUSIVE REMEDY

The exclusive remedy of the purchaser in the event the product does not conform to this

Warranty shall be repair or replacement of the product (at the option of Morbark) without

charge to the purchaser, when the product is returned to Morbark’s factory at 8507 South

Winn Road, Winn, Michigan, 48896, or at such other locations as may be designated by

Morbark. Morbark shall have sole discretion to determine whether and to what extent the

product is defective in material or workmanship. The acceptance by Morbark of any product

returned is not an admission that the product is defective and if Morbark determines the

product is not covered by this Warranty, the product may be returned to the purchaser at

purchaser’s expense.

DISCLAIMER OF WARRANTY

This warranty is in lieu of all other warranties express or implied. Morbark makes no

other warranties regarding the equipment and in particular, makes no implied warranty of

merchantability or fitness for a particular purpose, which are expressly disclaimed.

LIMITATION OF DAMAGES

Morbark shall not be liable for any incidental or consequential damages, directly or by

subrogation, including but not limited to any claims for fire damage, lost profits, downtime or

loss of use in the event the product is defective.

Содержание 600HD


























































































Результаты поиска

Содержание 600HD

Отзывы:

Похожие инструкции для 600HD

Бренды по названию

Популярные бренды

BOXER 600HD, Руководство оператора

Результаты поиска

Содержание 600HD

Отзывы:

Похожие инструкции для 600HD

Бренды по названию

Популярные бренды