BOXER 600HD Скачать руководство пользователя

Страница: 59 / 89

Routine Service and Maintenance

4.6

•

Allow engine to cool before removing the filter bowl. Spilled fuel can potentially

ignite or explode.

•

Place a container underneath the filter assembly to catch any spilled fuel.

• Properly dispose of fuel according to State and Local regulations.

If water needs to be removed;
1.

Rotate the fuel shut off valve (Item 2,

Figure 4-6)

to stop the fuel flow from the tank.

Place a suitable sized container beneath the filter assembly to catch any spilled fuel.

Rotate the filter bowl (Item 1,

Figure 4-6)

and remove it from the filter assembly.

4. Dispose of the fuel and water in the bowl according to State and Local regulations.
5.

Reinstall and secure the filter bowl.

6. Reopen the fuel valve.

If the fuel bowl does not fill with fuel, it may be necessary to air bleed the fuel system.

See Fuel System Air Bleed instructions later in this section.

Release dirt from separator tube at the bottom of the air filter by squeezing the rubber dust

ejector valve (Item 1,

Figure 4–7

) underneath the air filter.

Figure 4-7 Release Dirt from Air Cleaner

CAUTION

NOTICE

Содержание 600HD


























































































Результаты поиска

Содержание 600HD

Отзывы:

Похожие инструкции для 600HD

Бренды по названию

Популярные бренды

BOXER 600HD, Руководство оператора

Результаты поиска

Содержание 600HD

Отзывы:

Похожие инструкции для 600HD

Бренды по названию

Популярные бренды