EMULATION: F9 47
Save Labels:
[Off, On]
When
on
, labels that are downloaded by the host will be saved in non-volatile memory.
If this selection and Display NV Labels are
off
, labels written by the host would be lost
upon entry and exit to Setup.
Attribute:
[Char, Line, Page]
Choose the extent to which attributes are propagated. (The only parallel ASCII
emulations are PC Term and Wyse 60.)
Display NV Labels:
[On, Off]
Select whether the labels in non-volatile memory are displayed on the lowest line.
When
off
is selected, any existing labels will remain on the screen, until
on
is selected,
and they are re-displayed. On a 26-line screen, they are displayed below line 24. On a
44-line screen, labels are displayed below line 42, and on a 52-line screen, they are
displayed below line 50. (The top line is the top status line and cannot be used for
data.) If the page length used is a multiple of 25 (instead of 24) and the screen length is
26 lines , then the last data line is used for data and labels will not be displayed
regardless of this setting. The same is true for a page length that is a multiple of 43
(instead of 42) with a screen length of 44 lines.
Status Line:
[Standard, Extended, Off]
Select the type of the status line. In
standard
, cursor row and column, session indicator,
print indicator, Caps Lock, and communications mode are displayed. In
extended
, only
session indicator, Caps Lock, communications mode, protect and write protect are
displayed.
Char Set:
[National, Multinational]
Select whether the character set used is the 7-bit national chart or the 8 -bit
multinational chart when Language is not U.S. If U.S. is chosen, the character set is
multinational
.
Enhanced Attributes:
[Off, On]
When set to
on
, gives a better display presentation in overscan and reverse video
modes. The blink and dim video attributes will affect the foreground text instead of
the background. This selection is only available in reverse video mode, on a
per-session basis, and is disabled in a “split” display screen.
