Boundless ADDS 3153 Скачать руководство пользователя | Manualshive

Страница: 52 / 82

background image

42 Setup

PORTS: F6

EIA Baud Rate:

[110, 150, 300, 600, 1200, 1800, 2000, 2400, 4800, 9600,

19200, 38400, 57600, 768000, 115200, 134400]

See the Quick menu earlier in this chapter.

EIA Data Format:

[7/1/N, 7/1/O, 7/1/E, 7/1/M, 7/1/S, 7/2/N, 7/2/O, 7/2/E,

7/2/M, 7/2/S, 8/1/N, 8/1/O, 8/1/E, 8/1/M, 8/1/S, 8/2/M, 8/2/N, 8/2/O, 8/2/E,
8/2/S]

See the Quick menu earlier in this chapter.

EIA (Aux) Parity Check:

[On, Off]

Choose whether the parity bit will be checked. When parity check is on and the parity
bit received is inconsistent with the data received, indicating an error in
communications, an asterisk (*) 2Ah is displayed instead of the character.

Aux Baud Rate:

[110, 134.5, 150, 300, 600, 1200, 1800, 2000, 2400, 4800,

9600, 19200, 38400]

See the Quick menu earlier in this chapter.

AUX Data Format:

[7/1/O, 7/1/E, 7/1/M, 7/1/S, 7/2/N, 7/2/O, 7/2/E, 7/2/M,

7/2/S, 8/1/N, 8/1/O, 8/1/E, 8/1/M, 8/1/S, 8/2/N]

See the Quick menu earlier in this chapter.

EIA (Aux) Recv:

[No Protocol

Xon-Xoff (XPC), Xany-Xoff (XPC), DTR (DSR),

Xany-Xoff/DTR (DSR)]

Choose the form of flow control for data received from the primary or secondary host.
Software flow control uses

Xon-Xoff D

C1 (11h) and DC3 (13h).

XPC

is used by “Scan

Code” mode because it uses DC1 and DC3 as data.

Xany-Xoff (XPC)

is similar to

Xon-Xoff, except that any character transmitted to the host is treated as an Xon, so
data from the terminal is buffered, rather than being sent to the host.

DTR (DSR

for Aux

)

relies on the hardware signal DTR or DSR (pin 20 or pin 6) from the device.

Xany-Xoff/DTR (DSR)

uses software and hardware flow control

.

Flow control is recommended to protect against data loss.

EIA (Aux) Xmit:

[No Protocol,

Xon-Xoff, DSR (DTR), Both]

This is similar to “EIA (Aux) Recv,” except that it applies to the data transmitted
from the terminal to the primary or secondary host or printer. DSR is the hardware
signal for Data Set Ready (pin 6).

In ADDS



VP emulation and WP Graphics mode DC1 and DC3 can be

interpreted as data and should not be selected as a form of Protocol.

EIA (Aux) Xmt Pace:

[Baud

,

35 cps, 60 cps, 150 cps]

Define the maximum number of characters per second that the terminal can transmit.
When a characters limit (35 cps, 60 cps, or 135 cps) is set, the delays are averaged
between characters for the selected baud rate. This is also known as “pacing.” The

Baud

option provides no pacing, allowing data to be transmitted at the specified baud rate.

«
...
50
51
52
53
54
...
»

Содержание ADDS 3153



















































































Отзывы:

Нет отзывов

Похожие инструкции для ADDS 3153

Бренд: PC-EFTPOS Страницы: 33

Бренд: Baracoda Страницы: 35

Бренд: LAKS Страницы: 24

Бренд: Chainway Страницы: 39

PayMatic 4B - Xerox MFP

Бренд: Inepro Страницы: 12

HD 12T21 MMD-xxx-Fxxx Series

Бренд: Hatteland Страницы: 134

Бренд: ELCOM Страницы: 32

Бренд: Contec Страницы: 89

Бренд: XAC Страницы: 8

Бренд: IOLINK Страницы: 2

Бренд: Schlumberger Страницы: 2

Бренд: Unitec Страницы: 16

Бренд: Pax Technology Страницы: 61

Бренд: Pax Technology Страницы: 59

Pro-face GLC2300

Бренд: Digital Electronics Corporation Страницы: 155

Бренд: Datavan Страницы: 2

Бренд: GAI-Tronics Страницы: 5

VIPA TP-ECO TP 604LC

Бренд: YASKAWA Страницы: 75

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды