Page 12
9e1060
3. DESCRIPTION
3.1 INSTALLATION CONDITIONS
The SmartWay 90 milking parlour must be installed in a building (under a roof), protected against negative weather
conditions.
The premises should have a minimum temperature of 5° Celsius and not have excessive humidity levels.
The installation conditions of the SmartWay 90 with regard to the external electrical and water connections, the structural
building conditions and other conditions on site do not fall within the sphere of responsibility of BouMatic.
Please follow the instructions in this manual.
Objects or other components that are added to the system or are located/assembled nearby must not interfere in any
way with its correct and safe operation.
To operate the SmartWay 90 milking parlour, two energy carriers must be available:
1- Electrical power supply: 230 V, 50 Hz (Europe)
2- Pneumatic energy: compressed air 8 bar, constant and oil free
The system is operated by a control unit installed in the milking pit so that the controlled actions can be monitored.
Please check the scope of delivery of the delivered goods and confirm receipt.
Please check the delivered goods against the order confirmation and delivery note for correctness and possible
transport damage.
Damages or apparent inconsistencies must be reported in writing within 48 hours of delivery.
Ensure that the machine used to unload the system from the lorry (forklift, tractor with front loader, etc.) has the
appropriate power.
The weight per pallet varies according to the milking parlour size. The weight does not exceed 3000 kg per
pallet/unit however.
3.2 DELIVERY
Receipt of goods:
BouMatic cannot be held liable for damage caused by improper unloading!
Do not stay under suspended loads during unloading and later assembly!
