Boston Whaler 370 Outrage, Руководство пользователя, Страница: 199 / 204

5-11
Section 5 • Care & Maintenance
R
370 Outrage
is put back into service, remove it from the system
and store it in an area that will not freeze.
FOR MORE INFORMATION OR TO ORDER PARTS
CONTACT MISTERS UNLIMITED
TM
CUSTOMER SERVICE
AT 1-888-764-6478.
NOTICE
As a precaution against insects and/or dirt
getting into the exposed mister lines, cover or
plug the nozzles and line ends.
Maintaining the Ultraleather fabric
The settee/bunk in the 370 Outrage cabin is constructed
with Ultraleather
TM
fabric. The Ultraleather
TM
will stay
soft and spple in all weather conditions. The fabric
cleans easily with soap and water, is stain resistant
and colorfast.
To Clean Your Ultraleather
TM
:
• Spot clean with mild soap and water
• Air dray or dry quickly with warm setting of
a hair dryer
• Stubborn stains can be removed with a mild
solvent (ie. Fantastic or Formula 409)
• Disinfect with a 5:1 bleach solution.
Long Term Storage & Winterization
Long periods of storage, winter lay-up and/or non-
use, common to boats, create unique problems. When
preparing to store a boat for extended periods of two
months or more it is best to make sure that the boat
and its systems are properly conditioned for such
extended periods of non-usage.
The guidelines presented on the following pages
give basic instructions on “winterizing” your boat
and boat systems. If inexperienced with the process
of winterization it is best to hire the services of a
professional.
In addition, always consult the owner’s manuals of
the various systems and equipment on your boat for
the manufacturer’s recommendations on winterizing
and long term storage.
Never start or run your outboard (even
momentarily) without having water circulating
through the cooling water intake holes in the
gear case. This will prevent damage to the
water pump (running dry) or overheating of
the engine.
!
CAUTION
Engine
Protecting your engine’s vital moving parts from
corrosion and rust caused by freezing of trapped
water or excessive condensation due to climatic
changes is very important. Freezing water in the
engine can cause extensive damage to the internal
moving parts. Internal engine parts can also be
affected by rust due to lack of proper lubrication
• Replace the engine oil and fi lter, running the
engine to drain out as much old oil as
possible.
• Flush the engine with fresh water using fl ush
muffs or a similar device attached to the raw
water pickup.
• Let all water drain from the engine.
• Fog the engine while it is running. Spray until
it stalls.
• Run fuel which has been treated with
conditioner and stabilizer through the
engine.
• Replace lower unit gear oil. Check for
moisture in old oil, a sign of deteriorating
seals.
• Remove the prop and grease the shaft and
threads.
• Treat all grease fi ttings with the recommended
lubricant.