Boston Scientific LATITUDE, Руководство для пациента

Страница: 53 / 84

45
LATITUDE
® Communicator Patient Manual
English
Checking that the Communicator Can
Connect to the LATITUDE System
Complete the following steps to check that the
Communicator can connect to the LATITUDE
system. You should do this if you have moved the
Communicator or if there has been a change in your
telephone service or LATITUDE Cellular Data Plan
subscription.
1. Check that the Communicator is plugged in and the
LATITUDE indicator is green.
2. Press and hold the Status button on the back of
the Communicator for more than 3 seconds. The
Sending Waves light green in sequence and repeat
while the Communicator attempts to connect to the
LATITUDE system.
If both Collecting and Sending Waves light, you did
not press the Status button long enough. Pressing
the Status button for less than 3 seconds displays
the status of the last interrogation and the status
of the last attempt to connect to the LATITUDE
system.
3. Watch the front of the Communicator. The Sending
Waves should light in sequence and repeat,
showing a connection to the LATITUDE system is in
progress.
4. Wait approximately 5 minutes for the connection to
complete.