Boss Snowplow MSC12060, Руководство пользователя

Страница: 9 / 28

Installing the Blade Guides
and Filling the Hydraulic
Reservoir
1. Attach the blade guides to the plow blade using
2 bolts (5/16 inch) and 2 self-locking nuts (
Figure
8 ).
g321728
Figure 8
1. Self-locking nut 3. Bolt (5/16 inch)
2. Blade guide
2. Ensure that the lift cylinder is completely
collapsed.
3. Remove the fill cap from the hydraulic reservoir
elbow (
Figure 9 ).
g320664
Figure 9
4. Slowly fill the reservoir with BOSS
high-performance hydraulic-fluid until it
accepts no more.
Note:
The reservoir holds approximately 1.9 L
(2 US qt) of hydraulic fluid.
5. Install the previously removed fill cap.
Installing the Wire Harness
DANGER
Vehicle engines contain moving parts and can
become extremely hot, capable of causing
severe burns and serious bodily harm.
Shut off the engine and allow it sufficient time
to cool down before installing this kit.
DANGER
Vehicle batteries can cause dangerous
electrical shocks that could lead to severe
burns or death.
Disconnect your battery before installing this
kit.
Note:
Apply dielectric grease to all electrical
connections.
9