Boss Snowplow MSC12060, Руководство пользователя

Страница: 13 / 28

5. Route the cables along the vehicle frame toward
the battery and controller connector and secure
them with cable ties.
6. Pull the plow controller connector into the
vehicle cab.
g038119
Figure 17
1. Self-tapping bolts 3. Plow controller connector
2. Dash bracket
7. Mount the plow controller connector to the dash
bracket, and secure the bracket to the left of the
steering wheel using 2 self-tapping bolts.
8. Plug the plow controller into the plow controller
connector.
9. Locate a keyed 12 V+ ignition source on
the vehicle wire harness and identify the
corresponding connector in your loose parts.
10. Slide the appropriate connector onto the end of
the black/red wire and crimp the connector to
secure it.
11. Connect the black/red wire to a keyed 12 V+
ignition source.
Note:
Connecting the wire to a source that is
not keyed can cause the battery to drain.
12. Connect the black power/ground cable to the
negative (-) battery terminal.
g321799
Figure 18
1. Black power/ground cable 2. Red power/ground cable
13. Connect the red power/ground cable to the
positive (+) battery terminal.
14. Secure all wiring in a position that avoids hot or
moving parts using cable ties.
Mounting the Snowplow
Refer to Mounting the Snowplow (page 15) to mount
the plow.
13