Boss Snowplow MSC12060, Руководство пользователя

Страница: 16 / 28

g320661
Figure 22
1. Coupler tower 3. Coupler spring pin
2. Coupler lever
4. Pushbeam assembly
5. Remove the electrical-plug dust-covers and
connect the plow wire harness to the vehicle
wire harness.
6. Push the SmartHitch2 switch on the side of the
coupler tower upward and raise the tower until
the coupler spring pins snap in.
Note:
For plows without the SmartHitch2,
manually push the coupler tower toward the
vehicle until the spring pins snap in.
g321675
Figure 23
1. SmartHitch2 switch 3. Coupler spring pin
2. Coupler tower
7. Ensure that both coupler spring pins have fully
engaged the coupler.
Note:
Move the coupler tower until the spring
pins engage completely.
Removing the Snowplow
Note:
The vehicle must be running before starting
this procedure. Set the parking brake. If your vehicle
does not have a parking brake, chock the wheels.
1. Activate the F
LOAT
feature on the plow controller.
g321676
Figure 24
1. Coupler tower 3. Coupler spring pin
2. Smart hitch switch
2. While putting upward pressure on the coupler
handle, turn the levers on the couplers to the
U
NLOCK
position.
g320661
Figure 25
1. Coupler tower 3. Coupler spring pin
2. Coupler lever
4. Pushbeam assembly
3. Push the SmartHitch2 switch on the side of the
coupler tower downward and lower the tower
completely.
Note:
For plows without the SmartHitch2,
manually push the coupler tower away from the
vehicle until the spring pins release.
16