Boss Snowplow MSC12060, Руководство пользователя

Страница: 8 / 28

Installing the Hydraulic
Hoses
1. Secure the rod end of the lift cylinder to the
push-frame assembly using a clevis pin, washer,
and hairpin cotter.
g321850
Figure 5
2. Remove the plug from the lower port on the lift
cylinder.
3. Using thread compound, install a 90° fitting to
the lower port on the lift cylinder.
g321731
Figure 6
4. Install the short hydraulic hose to the middle
fitting on the hydraulic shelf and the previously
installed 90° fitting. Turn the fitting until it is
finger tight, then turn it 2 to 3 more times.
Important:
Do not overtighten.
5. Install the long hoses to the outer fittings
on the hydraulic shelf and route them to the
corresponding angle cylinder.
6. Remove the plug on the upper fitting on the lift
cylinder, and install the breather vent.
g321730
Figure 7
8