2402C SWEEPER STURDY SWEEP
™
QUICK and EASY ASSEMBLY
1. Lay four handle sections out in a line with handle grip at the top and threaded
hole at bottom.
2. Fit smaller tapered end of each section into the larger end of the next one
and push together for a snug fit.
3. With the pieces assembled, strike down on a hard surface to firmly lock
sections together. (Use a book or magazine to protect your floor.)
4. Lift the ball (threaded metal bar on the top of sweeper) to vertical position.
Screw sweeper handle all the way down to the "shoulder" of threaded metal
ball. Failure to do this could cause the ball to break.
5. Snap brush comb on handle.
To learn more about this product visit:
www.bissell.com
Or call us at:
BISSELL CONSUMER SERVICES:
1 800 263-2535
Part# 010-5530
