Troubleshooting NL
Malfunction
Cause and Troubleshooting
No water flows into
the device. The
detergent was not
washed in.
Water supply hose is kinked or pinched.
▶
Make sure that the water inlet hose is not
nods or clenches.
Start several times
with centrifugation.
The imbalance control system eliminates the
imbalance by distributing the laundry several times.
▶
No error - no action required.
Note: When loading, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
The program duration
changes during the
wash cycle.
The program sequence is electronically optimized. This
can lead to changes in the program duration.
▶
No error - no action required.
The imbalance control system eliminates the
imbalance by distributing the laundry several times.
▶
No error - no action required.
Note: When loading, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Foam control system will add an extra rinse if the
foam is too high.
▶
No error - no action required.
The water is not
visible in the drum
bar.
The water is below visible range.
▶
No error - no action required.
▶
Do not fill any additional water into the appliance during operation.
honeycomb.
Drum jerks after
program start.
The cause is an internal motor test.
▶
No error - no action required.
In the compartment
there is residual water.
Insert in compartment is hidden.
▶
Cleaning the detergent drawer",
Vibration and movement
of the appliance
during the spin
run.
The appliance is not leveled properly.
▶
Adjusting the device
Device feet are not fixed.
▶
Secure the device feet. Setting the appli-
raat
Transport protections have not been removed.
61
