Troubleshooting NL
s
1
fix disruptions
8 Troubleshooting
s
You can remedy minor faults on the device yourself. Before contacting customer
service, please refer to the troubleshooting information. This way you avoid
unnecessary costs.
fix disruptions
WARNING
Risk of electric shock!
Improper repairs are dangerous.
▶
Only trained specialist personnel may carry out repairs on the device
to carry out.
▶
Only original spare parts may be used for repair
ration of the device.
▶
If the power cord of this appliance is damaged, it must be
of risks must be replaced by the manufacturer, its service agent or a similarly
qualified person.
Malfunction
Cause and Troubleshooting
The display is off The energy saving mode is active.
and Start/Refill
▶
Press any button.
a The display lights up again.
flashes.
"E:30 / -80"
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶
Make sure that the drain pipe and water drain
feed hose is not kinked or pinched.
Drain pump is clogged.
▶
Cleaning the drain pump", page 51
Water drain hose is connected too high.
▶
Mount the water drain hose at a maximum of 1 meter
height.
Pump cover not assembled correctly.
▶
Assemble the pump cover correctly.
Detergent dosage is too high.
▶
Immediate measure: mix a tablespoon of fabric softener
ter with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
▶
During the next wash, reduce by an equal amount.
load the amount of detergent.
Unauthorized extension mounted on the water drain
hose.
57