Bosch WAV28MH0NL, Руководство пользователя и инструкции по установке

Страница: 58 / 72

NL Troubleshooting
Malfunction
Cause and Troubleshooting
"E:30 / -80"
▶
Remove unauthorized extensions to the wa-
discharge hose. Connect device
"E:36 / -25 / -26" Drain pump is clogged.
▶
→ " Cleaning the drain pump", page 51
"E:38 / -25 / -26" Drain pump is clogged.
▶
→ "
Cleaning the drum", page 49
if the fault is displayed again,
▶
→ "
Cleaning the drain pump", page 51
Inlet opening of the rubber sleeve is clogged.
▶
→ "
Clean the inlet opening in the rubber sleeve",
Page 53
Water pressure is low.
No solution possible.
The strainers in the water supply are clogged.
▶
Clean the strainers in the water supply →
Page 54.
Water tap is closed.
▶
Open the water tap.
Water supply hose is kinked or pinched.
▶
Make sure that the water inlet hose is not
nods or clenches.
Detergent dosage is too high.
▶
Immediate measure: mix a tablespoon of fabric softener
ter with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
▶
During the next wash, reduce by an equal amount.
load the amount of detergent.
burns.
Temperature is too high.
▶
Wait for the temperature to drop.
▶
→ "
program cancel", page 41
Water level is too high.
▶
Start the program pump down.
Laundry is wedged in the door.
1.
Open the door again.
2.
Remove trapped laundry.
3.
Close the door.
4.
To start the program, press Start/Additional
.
to fill
58