Cleaning and maintenance NL
16.2 Changing basic settings
Delete immediately
all detergent
residues, spray
skin remnants or
remaining residual
aunts.
Recent deposit
gene can make
lighter and sun-
of the remains
den removed.
1.
Set the program selector to
position 1.
The door of the
device and the
detergent drawer
open after use
let.
residual water can
then evaporate,
which the fragrance
formation in the
reduce device
third.
17.2 Cleaning the drum
CAUTION
Risk of injury!
2.
Press Spin speed and
at the same time turn the program
selector to position 2.
Permanent washing at low
temperatures and lack of ventilation
of the appliance can damage the
drum and cause injuries.
▶
Regular program for
clean the drum or wash at a
temperature of at least 60°C.
▶
The appliance after every use
leave an open door and detergent
drawer to dry.
a The display shows the current value
the on.
3.
Set the program selector to the
desired position.
4.
Press - / + to change the value.
5.
Turn off the device to save the
change.
1
Cleaning and maintenance
7 Cleaning and maintenance
hold
▶
Run the program Drum
cleaning without laundry.
Use a powder detergent.
R
R
cleaning and maintenance
clean and maintain your appliance
carefully to ensure that it continues to
work properly for a long time.
17.3 Cleaning the detergent
drawer
17.1 Tips for maintenance
estel
Note: Take the information on the
topic of safety
Page 11 take care of your device
to use safely.
of the to
The housing and
the operating
panel only
with water and a
damp cloth
take.
This keeps
these parts
clean and hygienic
nic.
1.
Pull out the detergent drawer.
49
