Bosch WAV28MH0NL, Руководство пользователя и инструкции по установке

Страница: 17 / 72

Set up and connect NL
1.
Connect the water inlet hose to the
appliance.
Note: Observe the pumping heights.
The maximum pumping height
wears 100 cm.
The connection position
tie with a
hose clamp
(24-40 mm) bore
gene.
2
1
Drain in a
washbasin
the water drainage
feeding hose with
a bend
→ Page 33
confirm and
secure.
2.
Connect the water inlet hose to the
tap (26.4 mm = 3/4").
¾
min.
10mm
Drain in and
plastic stand
pipe with rubber
the water drainage
feeding hose with
a bend
min.
17mm
run sleeve or in a → Page 33
drain. confirm and
secure.
3.
Open the tap carefully and check
that the connections are tight.
Water drainage connection types
The information will help you connect this
appliance to the water outlet.
4.6 Adjusting the device
To reduce noises and vibrations and
to prevent the device from walking,
adjust the device horizontally.
Note: Take the information on the
topic of safety → Page 4
and avoid material damage
→ Page 11 take care of your device
to use safely.
Note: Take the information on the
topic of safety →
Page 4
and avoid material damage
→ Page 11 take care of your device
to use safely.
PAY ATTENTION!
When draining, the water drain hose is
under pressure and can come loose
from the installed connection position.
▶
The water drain hose against un-
intended to secure loosening.
17