Bosch VIP X1, Инструкция по установке и эксплуатации

Страница: 47 / 144

VIP X1 | Installation and Operating Manual EN | 47
Bosch Security Systems | 2006-12 | V2.5 Configuration using a Web browser
Audio settings (audio version only)
You can set the gain of the audio signals to suit your specific requirements.
The current video image is shown in the small window next to the slide controls
to help you check the selected audio source and improve assignments. Your
changes are effective immediately.
If you connect via Web browser you must activate the audio transmission on the
Livepage configuration page (see page 94). For other connections the trans-
mission depends on the audio settings of the respective system.
Line In 1: / Microphone (MIC):
You can set the gain of the audio signal for the line input and for the microphone
input. Make sure that the display does not go beyond the green zone during
modulation.
Line Out/Speaker (SPK):
You can set the gain of the line and loudspeaker output. Make sure that the dis-
play does not go beyond the green zone during modulation.
Selection
Click one of the option boxes and then click Set to display the level of the respec-
tive audio input for orientation and to set the gain.