Bosch VIP X1, Инструкция по установке и эксплуатации

Страница: 130 / 144

EN | 130 Installation and Operating Manual | VIP X1
Appendix Bosch Security Systems | 2006-12 | V2.5
Command inputs
After the connection has been established, you must log on to the VIP X1 to
access the main menu. Other submenus and functions can be accessed using
the on-screen commands.
– If necessary, turn off the local echo so that entered values are not repeated
on the display.
– Enter one command at a time.
– When you have entered a value, such as an IP address, check your input
again before pressing the [ENTER] key to transfer the values to the VIP X1.
Assigning an IP Address
Before you can operate a VIP X1 in your network you must first assign it an
IP address that is valid for your network.
The following default address is preset at the factory: 192.168.0.1
– Start a terminal program such as HyperTerminal.
– Enter the user name
service
. The terminal program displays the main
menu.
– Enter the command
1
to open the IP menu.