Bosch UHI Series, Руководство по эксплуатации

Страница: 17 / 36

Figure 4.2: Unlatching the cover
Camera/Lens installation
1. Remove the two screws holding the camera tray to the housing. Remove tray from the
housing.
2. If using the feed-through feature, refer to Feed-through Wiring, page 19.
3. For installation of zoom lens cameras:
– Attach the lens to the camera.
– Use the various 1/4-20 screws and appropriate 4 mm and/or 9 mm spacers provided to
mount the camera and the lens to the camera tray. This camera tray is already pre-
installed.
4
Mounting fixed lens cameras in all housings:
– Attach the lens to the camera.
– Combine the 4 mm and the 9 mm spacers provided to mount the camera to the optional
camera tray type A (use different combinations of the spacers to ensure that the camera
lens is in the middle of the window). Use the 1/4-20 x 5/8 in. screw and large flat washer
to secure the camera and spacer to the camera tray, as shown in the figure below.
Figure 4.3: Spacers for mounting zoom lens and camera
Figure 4.4: Optional camera tray type A for fixed lense camera
4.5
UHI/UHO Series Camera Housing Installation | en 17
Bosch Security Systems, Inc. Operation Manual 2014.05 | 4.0 | F.01U.167.418