Bosch Rexroth Nexo, Руководство пользователя

Страница: 248 / 279

248
/279
Bosch Rexroth AG
| Tightening Technology
3 608 870 A47
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-
9.8.13 ID assignment
Settings

ID assignment
The ASCII code can be linked to a tightening program or a job, i.e. when the code is read, the respective
tightening program or the job starts. Specify the required settings in the ID assignment table.
Configure the respective operating mode in the
Mode
tab. Go to
ID code step
under
Target selection
ID input
to specify that a tightening program or job is to be selected using the ID assignment table.
9.8.14 Scanner
Settings

Scanner
Use this menu item to define the configuration of the scanner integrated into the hand-held nutrunner.
Settings

Scanner

Scanner configuration
Table 9–98: ID assignment tab
Element Description
ID assignment table
Use this menu item to change the ID assignment table.
– ASCII
Enter the ASCII characters of the code to select a tightening program or
job.
– Program
Activate this check box to activate the tightening program.
– Job
Activate this check box to activate the job.
– No.
Enter the number of the tightening program or job. Integer values between
0 and 255 are valid characters.
– Comments
Enter a comment.
Add
Adds a new entry in the assignment table.
Remove
Deletes an entry from the assignment table.
Save
Click
Save
to save the edited data.
Discard
Click
Discard
to discard the edited data.
Import
Opens the
Import
dialog. Select the file to be imported.
Export
Exports the current settings to the download area.
Restore defaults
All settings in this tab are reset to the factory setting.
Table 9–99: Scanner tab - scanner configuration
Element Description
Active
Activate this check box to activate the barcode scanner.
Barcodes
For an overview of the supported barcodes, see table 9–100 .
There are several options for the length of the corresponding barcode:
– L1
Entry of a fixed length, e.g. „L1=12“
–
L1
;
L2
Entry of two fixed lengths, e.g. “L1=16;L2=8”
– L1-L2
Entry of a length range, e.g. „L1=3–L2=9“
– Any
No length restriction
Save
Click
Save
to save the edited data.
Discard
Click
Discard
to discard the edited data.