Bosch Rexroth Nexo, Руководство пользователя

Страница: 202 / 279

202
/279
Bosch Rexroth AG
| Tightening Technology
3 608 870 A47
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-
9.7.3 Steps of tightening programs
The tightening program always begins with the start step and ends with the end step; in a new tightening
program, both are already assigned in the
Programs
menu. Different or identical job steps can be
inserted between these two tightening steps. Selection, number, and order of these tightening and
auxiliary steps depend on the required tightening process. New steps are always inserted in the tightening
program before a selected step.
The following table provides an overview of the steps available in a tightening program.
9.7.4 Creating a new tightening program/editing an existing tightening program
A tightening program contains the following information:
•
Type and order of tightening steps
• Target and monitoring parameters of each tightening step
Accept values
 Click
OK
to apply the edited values to the tightening program. Click
Cancel
to discard your changes.

The dialog window will be closed in either case.

Click
Save
to apply the tightening program.
Table 9–37: Steps available in a tightening program
Element Designation Explanation See page
Start step Start of tightening program (page 203)
Standard tightening step These tightening steps control the nutrunner and
thus the tightening process. (page 205)
End step End of the tightening program (page 207)
As of Nexo firmware version 1200, the steps are displayed as property sheets.