Bosch Rexroth Nexo, Руководство пользователя

Страница: 227 / 279

3 608 870 A47
Tightening Technology |
Bosch Rexroth AG 227
/279
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-10
Step number
Defines the step number for IPM data output:
– Sequential final tightening step=99
Every step receives a sequentially assigned number (1 ... n), according to
the output order in the tightening system.
The last tightened step receives either number 99 (final tightening step)
or number 0 (no final tightening step).
The information whether there is a final tightening step is buffered by the
last tightening position with OK tightening of this AFO.
– Sequential
Every step receives a sequentially assigned number (1 ... n), according to
the output order in the tightening system.
Step category
Defines the step category for IPM data output:
– End final tightening mode
Possible output values are either "unknown" or "end tightening".
"End tightening" is only output if the step number is identical with the
buffered end tightening step number of an OK tightening of this AFO
completed in advance.
– Step type
The number of the step type of the tightening step of the tightening
system is accepted without changes.
Step filter
Defines the tightening steps that are transferred to IPM:
– All steps
– Last step
Step output order
Defines the order in which the tightening steps are transferred to IPM:
Sequential
1 If the table does not contain a combination of channel/program, the data is always forwarded to the IPM gateway
(with an automatically generated AFO) so that no data can get lost.
Table 9–73: Assignment of the combination of channel number and program number
Element Description