Bosch Rexroth Nexo, Руководство пользователя

Страница: 121 / 279

3 608 870 A47
Tightening Technology |
Bosch Rexroth AG 121
/279
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-10
Tightening error status Error bits indicate errors in the tightening system and are generated from
the following bits in the quality code:
– Bit 3 (TorqH): The torque is above the defined tolerance window.
– bit 4 (AnglH): The angle is above the defined tolerance window.
– Bit 14 ((C)Cw=0): CCw or Cw deactivated during the tightening.
– bit 15 (TorqL): The torque is below the defined tolerance window.
– bit 18 (Start-up test): Start-up test NOK
– bit 21 (TimeH): The time is above the defined tolerance window.
– bit 23 (En=0): Enable during tightening deactivated.
The value consists of ten ASCII characters.
ID
20
2
Value range
0000000000 – 9999999999
Presetting
-
Example:
Tightening error
status
AngTotH
Value
0000000001
10
Minimum torque limit (T-) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID
21
2
Value range
000000 – 999999
Presetting
-
Example:
Minimum torque
limit (T-)
12,00
Value
001200
6
Maximum torque limit (T+) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID
22
2
Value range
000000 – 999999
Presetting
-
Example:
Maximum torque
limit (T+)
20.11
Value
002011
6
Target torque (TP) The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID
23
2
Value range
000000 – 999999
Presetting
-
Example:
Target torque
(TP)
23,40
Value
002340
6
Table 7–32: MID 0061 revision 002
Parameter Comments Bytes