Bosch rexroth MS2N03-A Скачать руководство пользователя страница 9

Страница: 9 / 72

9 / 72

MS2N

Presentation of information

Bosch Rexroth AG

R911347581, Edition 05

About this documentation

1.1

Editions of this documentation

This documentation explains the product characteristics, application possibilities, operating conditions

and the operational limits of the motors, contains the technical data of the available motors and

provides information on product selection, handling and operation.
Table 1: Record of revisions

Edition

Release date

Notes

2015-03
2015-05

First edition
First edition corrected

2016-06

Revision according to project planning manual edition 01

2018-04

Revision according to project planning manual edition 03, water cooling

2020-10

Extending product range: Frame size 13

Editorial revision

2022-02

Terminal boxes, single cable connector M17

1.2

Presentation of informa-

tion

Safety instructions

The safety instructions in this documentation

include signal words (danger, warning, cau-

tion, note) and a signal symbol (acc. to

ANSI Z535.6-2006).
The signal word is intended to draw your atten-

tion to the safety instructions and describes the

seriousness of the danger. The warning triangle

with exclamation mark indicates the danger for

persons.

DANGER

Non-compliance with this safety instructions will

result in death or severe personal injury.

WARNING

Non-compliance with this safety instructions can

result in death or severe personal injury.

CAUTION

Non-compliance with this safety instructions can

result in moderate or minor personal injury.

NOTICE

Non-compliance with this safety instructions can

result in material damage.

Safety symbols

In the documentation, the following internation-

ally standardized safety signs and graphic sym-

bols are used. The meaning of the symbols is

described in the table.
Table 2: Meaning of safety signs

Safety sym-

bols

Meaning

Warning against dangerous electric

voltage
Warning against hot surfaces

Warning against rotating machine

parts
Warning against overhead load

Electrostatic sensitive devices

About this document

ation

Содержание rexroth MS2N03-A









































































Результаты поиска

Содержание rexroth MS2N03-A

Отзывы:

Похожие инструкции для rexroth MS2N03-A

Бренды по названию

Популярные бренды

Bosch rexroth MS2N03-A, Руководство по эксплуатации

Результаты поиска

Содержание rexroth MS2N03-A

Отзывы:

Похожие инструкции для rexroth MS2N03-A

Бренды по названию

Популярные бренды