Bosch rexroth MS2N03-A Скачать руководство пользователя страница 54

Страница: 54 / 72

54 / 72

MS2N

Connection water cooling

Bosch Rexroth AG

R911347581, Edition 05

Position power connector at thread.

Tighten knurled nut securely, in doing so,

retrace cable.

Check the firm seat of the connection by

short pull on the connector.

Secure the cables, that accruing forces

due to cable vibrations onto the connector

are prevented.

🡆

The plug-in connector is ready for use.

7.4.19 Connect the terminal box.

WARNING

Danger to life by high electric voltage!

−

Follow the general installation and safety

regulations when working on power installa-

tions.

−

Before start-up, connect the protective

conductors on all electric components

according to the connection plan.

−

Install the covers and guards provided for

this purpose before switching on. Lock all

openings of the terminal box with dummy

plugs and close the terminal box with the

intended terminal box lid.

−

Never touch electrical connection points of

the components while power is turned on.

Observe when connecting the terminal box:

•

Connect or disconnect clamp connections

only in de-energized, dry and clean state.

•

Connect the motor to ready-made connec-

tion cables.

•

Remove dummy plug X or Y at the cable entry

side.

•

Select and tighten the cable gland according

to the manufacturer´s details about cable

diameters.

•

The connections must be established such

that a permanent safe electrical connection

is ensured.

•

Establish a safe protective conductor con-

nection.

•

After connecting, lock all openings.

7.5

Connection water cooling

Any installation material, like tubes or mounting

clamps are not in the scope of delivery. Choose a

supply hose with correct inner diameter.

Содержание rexroth MS2N03-A









































































Результаты поиска

Содержание rexroth MS2N03-A

Отзывы:

Похожие инструкции для rexroth MS2N03-A

Бренды по названию

Популярные бренды

Bosch rexroth MS2N03-A, Руководство по эксплуатации

Результаты поиска

Содержание rexroth MS2N03-A

Отзывы:

Похожие инструкции для rexroth MS2N03-A

Бренды по названию

Популярные бренды